Section 4
System Settings
4.
Exit function setting.
When all the desired changes are made, select [Exit]. The Setup window will
reappear.
If [Cancel] is selected in the Setup window after changes are made in the
Setup Function window, the previous settings (before changes are
made) can be restored.
5.
Save the setting data.
Select [Save] in the Setup window.
After the save window is displayed, the menu window will be displayed.
To reflect the changes made on a Code Reader to two or more Code Readers, the data must
backed up to the Memory Card and then uploaded to those Code Readers.
6.
Exit setting mode.
Select [Exit] in the menu window. The setting mode will be exited.
V400-H111/211
52
User's Manual
p.53