Omron V400-H111 User Manual page 67

Function Settings
Make the following settings in the [Function Settings] tab of the Create Setting Data
Window.
Setting item
Trigger Mode
Buzzer
Sleep Shift Time
NG output (N)
Data Accumulation
Display(Y)
Lighting (H)
The default settings are indicated with an asterisk.
Data Accumulation
Set whether to collect data.
The Memory Card must be inserted in the Handheld 2D Code Reader to use this
function.
When this function is ON, read data will be saved in a file with the following name in the
Memory Card's READDATA folder. The READDATA folder will be automatically
generated if it does not already exist.
READ****.csv
Note: The digits indicated by **** start at 0000 and increment by 1 for approximately
each 40 kilobytes.
After reading is completed, the data is written to the Memory Card, which will take
several seconds.
*
Level Trigger or Alternate
*
ON or OFF
*
Between 30 sec and 120 sec
*
ON or OFF
*
OFF or ON
Normal*/Mode A/Mode B/Mode C
V400-H111 Auto*/Oblique/R-coax/G-coax/B-coax
V400-H211 Auto*/Oblique/Coaxial
System Settings
Settings
V400-H111/211
Section 4
65
User's Manual