Advertisement
Quick Links
CORTADORA DE FIAMBRES AUTOMÁTICO INOX, LÂMINA 300 mm
MODEL
CA-300L
547042 - INGLÊS
Data de Revisão: 17/11/2017
Metalúrgica Skymsen Ltda
Rodovia Ivo Silveira 9525
Volta Grande
88355-202 Brusque/SC/Brasil
CNPJ: 82.983.032/0001-19
www.skymsen.com – Fone: +55 47 3211 6000
THE INFORMATION CONTAINED IN THE PRESENT INSTRUCTION MANUAL MAY BE MODIFIED WITHOUT PREVIOUS NOTICE.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Skymsen CA-300L
Summary of Contents for Skymsen CA-300L
- Page 1 547042 - INGLÊS Data de Revisão: 17/11/2017 Metalúrgica Skymsen Ltda Rodovia Ivo Silveira 9525 Volta Grande 88355-202 Brusque/SC/Brasil CNPJ: 82.983.032/0001-19 www.skymsen.com – Fone: +55 47 3211 6000 THE INFORMATION CONTAINED IN THE PRESENT INSTRUCTION MANUAL MAY BE MODIFIED WITHOUT PREVIOUS NOTICE.
- Page 2 SUMARY the edge of a desk or workstation and that it does not touch any heated surfaces. 1. INTRODUCTION ......2 1.1.6 Always after the Equipment suffers a fall, is 1.1 Safety ......... 2 damaged in any way o is not working it is necessary to take 2.
- Page 3 Make sure that the Energy feeding Cord is in perfect use conditions. In case that any kind of imperfections or damages are visualized, contact a qualified technical service to perform the changing of the cord, respecting all the local safety rules and regulations. The new cord must comply with all the technical safety norms and regulations.
-
Page 4: Installation And Pre-Operation
2. COMPONENTS AND TECHNICAL CHARACTERISTICS The Line Slicer is a tabletop equipment capable of slicing different products, such as: Cheese, Bologna and Ham. PICTURE 01 TABLE 01 FEATURES UNIT CA-300L Average Production kg/h Variable Voltage Frequency Power Rating Height Width... - Page 5 3.2 Electric Installation 4.2 Operational Procedure This equipment is designed to work in 220 Volts (50Hz). 01 - Make sure that the voltage of the mains where the Please verify the voltage informed on the label attached to equipment will be installed is compatible with the voltage the cord when you unpack it.
- Page 6 - Blade Cover: PICTURE 09 Remove the Lock Handle (N°01 Picture 08), spinning it in the anti-clock direction until its complete removal.; PICTURE 07 05. Turn the grinding sharpener to (item 01 Fig .: 10) and push the Sharpener bearing (item 02 Fig .: 10) to clean behind the wheel.
-
Page 7: Maintenance
4 - Spin the Finishing Sharpener upwards and push the * Installation – Verify the installation of your equipment Sharpener Bearing to clean behind the grindstone. according to item 2.1 Installation on this manual. * 1 - Items to verify and execute monthly: PICTURE 13 - Verify the electrical installation;... -
Page 8: On/Off Switch
8. Electric Diagram ELECTRIC GRID ON/OFF SWITCH...
Need help?
Do you have a question about the CA-300L and is the answer not in the manual?
Questions and answers