Omron S8TS Brochure & Specs page 4

S8TS series specifications
Model S8TS-06024-E1
Input voltage
Power 60 W
Output voltage 24VDC (2.5A)
(current)
Output adjust 22-28V
Parallel operation Yes (4 max.)
N+1 redundant Yes
system (4 + 1 = 5 max.)
DC back-up Yes
connection
Bus connectors S8T-BUS01 + S8T-BUS02 (included)
Terminal
Other functions
Dimensions (W x H x D)
Model
Input voltage
Output voltage (current)
Parallel operation
Bus connectors
Terminal
Other functions
Dimensions (W x H x D)
Battery and holder
World-wide compatibility
Each S8TS unit accepts an input voltage of between 85 and
264VAC (47 to 63Hz), making it suitable for connecting to the
mains supply of many countries. The S8TS is CE marked and
approved to the latest European legislation regarding noise
and emissions, so it can be used in all new systems, as well
as a replacement for old or failed units. The S8TS is approved
S8TS-03012-E1
30 W
12VDC (2.5A)
10.8-13.2V
Yes (4 max.)
Yes
(4 + 1 = 5 max.)
No
Screw terminal type
Over-current protection / Over-voltage protection, Under-voltage indicator / Under-voltage open collector output
S8T-DCBU-01
24 to 28VDC (from S8TS)
24VDC (normal) / 21 to 27.4VDC (back-up)
-
S8T-BUS03 (included)
Over-charge protection, Over-discharge protection,
Over-current protection, Remote back-up on/off input
S82Y-TS01 (for S8T-DCBU-01)
Battery holder with on/off switch and fuse
185.7 x 222.25 x 82 mm
S8TS-02505 S8TS-06024F-E1
100–240VAC (85–264VAC)
25 W 60 W
5VDC (5A) 24VDC (2.5A)
4.5-5.5V 22-28V
No Yes (4 max.)
No Yes
(4 + 1 = 5 max.)
No Yes
- S8T-BUS01 + S8T-BUS02 (included)
43 x 120 x 120 mm
22VDC (at 24V input); 25.8VDC (at 28V input)
Screw terminal type
43 x 120 x 120 mm
Valve regulated Lead-Acid battery (Panasonic)
Two batteries are required for one back-up system
to the applicable UL and CSA standards, so it can be used
in both domestic and export markets. In addition, the S8TS
range complies with the latest European regulations
amendment regarding Power Factor Correction
(EN61000-3-2 and EN61000-3-2 A14) and SEMI F47-0200
for the S8T-DCBU-02.
S8TS-03012F-E1 S8TS-02505F
30 W
12VDC (2.5A) 5VDC (5A)
10.8-13.2V 4.5-5.5V
Yes (4 max.)
Yes
(4 + 1 = 5 max.)
No
Connector terminal type
S8T-DCBU-02
24 to 28VDC
Yes (4 max.)
S8T-BUS03 (not included)
READY indicator, READY output,
Back-up indicator, Back-up output
LC-R123R4PG (for S8T-DCBU-01)
12V / 3.4Ah
25 W
No
No
No
-