Common Attributes - Omron NT21 Reference Manual

Recipes

2-14-4 Common Attributes

Recipe Table Properties
Specifying Individual Recipe Data (Recipe Settings)
Recipe Entry Number (Number)
Recipe Data Name (Name)
Comment
No. of Records
No. of Parameters
Storage Type (for words on host)
Host Address Setting
PC Address
I/O Comment
Specifying Individual Records
Serial Number (No.)
Record Name (Record)
Lock (Enable or disable
editing from PT)
Specifying Individual Parameters
Parameter Name
(Parameter)
Words
Dec/Hex
Sign
Value
Width
Integers
Decimals
The recipe table properties and recipe element properties are as follows:
Automatically allocated (1 to 200)
Character string (12 alphanumeric characters)
Character string (24 alphanumeric characters)
1 to 1000
1 to 200
BCD, binary, or system (See note.)
Note System: Depends on numeral storage type in the PT configuration setting
on the Support Tool.
The words on the host for reading and writing recipe data (in record units).
You can read and write recipe data (in record units) from/to words of one record
(number of parameters
start address. Refer to Words Allocated to Records below for details.
You can read and write 400 words max., starting from the start word (when there
are 200 parameters and all parameters are 2 words long)
I/O comments express details about words allocated in the host.
Character strings 16 characters max.
Automatically allocated (1 to 1000)
Character string (12 characters max.)
Specify whether editing is enabled or disabled (i.e., read only) for operations on the PT.
Selected: Editing disabled; Not selected: Editing enabled
Character string (8 characters max.)
Allocated size of host words (1 word or 2 words)
Display format of numerical data (decimal or hexadecimal)
Select whether to enable or disable input of negative numbers. (Disabled when display
format is set to hexadecimal.)
Selected: Enabled; Not selected: Disabled
Parameters that can be set using the Support Tool
–2,147,483,648 to 2,147,483,647
Number of digits in the integer
1 word: 1 to 5, 2 words: 1 to 10
Number of decimal digits
1 word: 0 to 4, 2 words: 0 to 9
each data length) specified with this address as the
Total 10 digits max.
Section 2-14
227