Installing A Pci Board And Setting The Dip Switch - Omron NSA Manual

3-2

Installing a PCI Board and Setting the DIP Switch

3-2 Installing a PCI Board and Setting
the DIP Switch
Removing the Side Cover
3
Note
3-4
Follow the steps below to install a PCI Board or to change the default setting of
the DIP switch.
Be sure to turn OFF the NSA-series Industrial PC power supply (external input power
supply) before you remove the side cover and set the DIP switch.
1. Turn OFF the NSA-series Industrial PC power supply (external input power
supply) and loosen the three screws securing the side cover.
Side cover
fastening screws