Installing A Pci Board And Setting The Dip Switch; Installing A Pci Board - Omron NSA12-TX11B User Manual

3-3

Installing a PCI Board and Setting the DIP Switch

3-3-1 Installing a PCI Board

3-3 Installing a PCI Board and Setting
the DIP Switch
3-3-1 Installing a PCI Board
3
Removing the Back Cover
Note
3-6
Follow the steps below to install a PCI Board.
Step 1 Remove the back cover.
↓
Step 2 Install the PCI Board.
↓
Step 3 Reattach the back cover.
Be sure to turn OFF the NSA-series Industrial PC power supply (external input power
supply) before you remove the back cover.
1. Turn OFF the NSA-series Industrial PC power supply (external input power
supply) and remove the seven screws securing the back cover.
Back cover set screws