Omron NSA Manual page 110

Appendix 6 Using Virtual Memory
Appendix 6-1 Setting and Deleting the Paging File
Appendix
Note
Appendix-30
2. Click the Advanced Tab and then click the Change Button in the Virtual
Memory Area.
3. Next we will set up or delete the paging file.
1) The following steps are for setting up the paging file.
Make sure that the drive selected is C: (i.e., the DOM). Then select the
Custom size Option, and input values to specify the Initial size and Maximum
size Fields.
In the Initial size Field, input the amount of memory that you want to use for the
paging file.
In the Maximum size Field, input the maximum amount of memory that you
want to use for the paging file.
A paging file of the size that you specified will be created in the drive that you
specified. In the example shown above, a 753-MB file will be created in the C: drive
(i.e., the DOM). Check the amount of free space on the DOM, and set the initial size
and maximum size appropriately.