•
The startup and shutdown monitoring functions available from the special RAS
Note
Board enable operating system monitoring to determine whether or not the OS
started up a specified amount of time after the power was turned ON or a
specified amount of time after the system shutdown.
•
The C: and D: drives are defined in the NSA-series Industrial PC. When a
Memory Card is being used, use a drive letter other than C: or D:.
↓
Step 5 Make non-PS/2 port connections and insert card.
A memory card (CF Card) can be inserted and USB, RS-232C, or Ethernet
connections can be made after the power is turned ON.
↓
Step 6 Adjust the touch panel and display.
Adjust (calibrate) the touch panel positioning as needed.
•
Touch panel positioning adjustment (calibration): The pre-installed
universal pointer device driver (UPDD) program is used to calibrate the
touch panel.
Refer to 3-5-1 Calibrating the Touch Panel.
↓
Step 7 Start up the application.
3-1
Basic Operating Procedures
3
3-3