Omron NS - HOST Connection Manual page 42

3-2 Settings
3-2-1 Making settings for the Project
The Memory Link can be used in combination with
NS system program Ver. 5.0 and later versions
System Ver.5.0 and later projects
With NS-Designer V5.0 and later, you can create and edit project developed by System
Ver.5.0 and later projects.
A project created with NS-Designer Ver. 4.0 or earlier can be opened and converted to
the data of Ver.5.0 and later.
In NS-Designer Ver. 5.0 or later open SystemVer.5.0 and later project, click Settings –
System Setting. Select tab 'Comm.– All' and set Serial Port A (or Serial Port B) to
Memory Link (select from the pull down menu).
You cannot simultaneously set Serial Port A and B to Memory Link.
5