Omron NS - HOST Connection Manual page 11

1-1 List of combinations
This explains the configuration when host is other than Omron PLCs.
1-1-1 Connection of temperature controller
Communicates with Omron temperature controller via RS-485.
Connect RS-422 converter CJ1W-CIF11 to serial port A or B and set communication
mode to RS-485.
For details, refer to 'Chapter 2: connection of temperature controller'.
1-1-2 Connection with memory link
When host other than PLC such as board-controller and personal computer is used,
connection via memory link is possible. Use serial port A or B to connect host equipment.
For details, refer to 'chapter 3: connection via memory
2
link'.