Omron NS - HOST Connection Manual page 26

2-6 Operation of Temperature Controller
The use of Smart Active Parts, allows you to operate PT screen to change Temperature
Controller running conditions and to disable/enable communications writing.
2-6-1 How to create a Smart Active Parts part
In NS-Designer, you open the arrange Smart Active Parts screen.
When you select Tools - Use Library , the library dialogue opens.
Under list of categories, tree of selectable libraries is shown.
Smart Active Parts for temperature controller you can find under PartsLib -> Smart Active
Parts_E -> Temperature Controller.
Temperature controller is grouped by model, channel and broadcast. For each operation
instruction, a Smart Active Parts part is available.
There are 2 categories: Instructions to the unit itself and broadcast .
When same instruction is given to all units, no results response is sent. For that reason error
judgment is omitted.
14