Subscribe to Our Youtube Channel
Related Manuals for Flexit SAT-EC
Summary of Contents for Flexit SAT-EC
- Page 1 120542EN-04 2024-05 SAT-EC Exhaust fan ITEM. NO. 120390, 120391, 120393, 120488, 121165 INSTALLATION AND OPERATION INSTRUCTIONS SAT ventilation system...
- Page 2 S A T - E C Our products are subject to continuous development and we therefore reserve the right to make changes. We also disclaim liability for any printing errors that may occur.
-
Page 3: Table Of Contents
Contents Installation/Preparatory work ..........................6 1.1. Installation diagram, SVEC .......................... 6 How does the system work? ..........................7 2.1. Use ................................. 7 2.2. Cleaning the system ............................ 7 ......................... 8 System description ..............................9 ............................9 ............................9 4.3. Fresh air intake ............................9 .............................. - Page 4 S A T - E C These products are marked with a number of symbols that are used for labelling on the product itself and in the installation- and user documentation. DANGER: DO NOT TOUCH Exhaust Outlet air Exhaust air ELECTRIC CURRENT air, kitchen...
- Page 5 SAFETY INSTRUCTIONS • • • • residences and commercial • • • specialists. • • • hood. • • • installed in cold spaces. • loose. • • screws or hose clips. • • sensory capacity or physical or knowledge, as long as they are S A T - E C...
-
Page 6: Installation/Preparatory Work
S A T - E C 1. Installation/Preparatory work 1.1. INSTALLATION DIAGRAM, SVEC Ø100 Ø125 Ø100 542,9 598,0 542,9 rather than the solid pipe shown in the drawing. The fan must be fastened in the brackets indicated,... -
Page 7: How Does The System Work
2. How does the system work? The used, poor-quality air from the kitchen, bathroom and toilet(s) is expelled from the building via the exhaust INFO! In order to maintain an air fan. appropriate indoor climate and Fresh, new outdoor air is drawn in through valves in the living room and bedroom(s). - Page 8 S A T - E C There are several types of fan to choose between. Check which type is installed in your home. LVEC attic fan KVEC duct fan SVEC cabinet fan The exhaust air fan is normally located in the attic, directly above the cooker hood.
-
Page 9: System Description
4. System description 4.1. OUTLINE DIAGRAM Bath- Laundry room room The entire system normally consists of an exhaust air Living room fan, cooker hood, fresh air valves, exhaust air valves, ducts and a roof cowl. The projected ventilation drawing illustrates how the Various versions of cooker hood and roof cowl are Bedroom Bed-... -
Page 10: Positioning
S A T - E C Attic fan (LVEC) Duct fan (KVEC) Cabinet fan (SVEC) 5.1. POSITIONING INFO! It is important to position Type LVEC – attic fan Fit the attic fan on a solid underlay. If there is no actual desired, the fan can be mounted on the wall or rafters, The unit is supplied with 2 metres of cable with upper, right-hand nipple. - Page 11 5.3. CONNECTION INSTRUCTIONS, STANDARD As standard, the SAT-EC fan is supplied connected so as to operate at a single speed: Home mode. on installation. In order to adjust the speed, turn the potentiometer labelled “Home” from 0 to 10, where 0 is stop (not used) and 10 is the max.
- Page 12 CONTROL PANEL In order to adjust the speed of Away mode, turn the If you install a control panel (accessory) for the SAT-EC potentiometer labelled “Away” from 0 to 10, where 0 is fan, this gives you three speeds to choose between.
- Page 13 5.5. CONNECTION INSTRUCTIONS WITH CONTROL PANEL AND FORCING SWITCH/HUMIDIFIER/COOKER HOOD If you install multiple accessories for the SAT-EC fan, this In order to adjust the speed of Away mode, turn the gives you three speeds to choose between. potentiometer labelled “Away” from 0 to 10, where 0 is The item nos.
- Page 14 COOKER HOOD In order to adjust the speed of Away mode, turn the If you install extra accessories for the SAT-EC fan, this potentiometer labelled “Away” from 0 to 10, where 0 is gives you three speeds to choose between.
- Page 15 5.7. CONTROL ACCORDING TO LOCAL REQUIREMENTS, SAT-EC In order to achieve energy class B, it is necessary control the fan according to local requirements. This independently of each other in at least two zones. diagram for connecting necessary accessories. Bathroom 1...
- Page 16 S A T - E C Disconnect voltage to the fan before performing maintenance. Component Fans 12 months 3 years Cooker hood 2 weeks 12 months 12 months necessary). 12 months or other matter. Check that the drainage hole is open. 10 years...
-
Page 17: Inspection/Maintenance
6.1. INSPECTION/MAINTENANCE Remove the plug from the socket to disconnect voltage from the product. There are several types of fan to choose between. Check which type is installed in your home. The exhaust air fan is normally located in the attic, directly above the cooker hood. -
Page 18: Dimensioned Drawings
S A T - E C 7. Dimensioned drawings KVEC 125 210,0 LVEC 125... - Page 19 SVEC R SVEC C 100(2X) 125(2X) S A T - E C...
- Page 20 Flexit AS, Moseveien 8, 1870 Ørje, Norway www.flexit.com...
Need help?
Do you have a question about the SAT-EC and is the answer not in the manual?
Questions and answers