Table of Contents
Advertisement
12.Input Signal Edge (edge)
The input signal edge will be displayed only when the "input
mode" at the initial setting level has been set to increment or
decrement.
Switches the CP1 input edge when the H8GN is used as an incre-
menting or decrementing counter. In the counter increment or
decrement modes, CP2 will function as the gate input and CP1
counting will be prohibited while CP2 is ON.
Refer to Input/Output Modes and Count Values on page 78 for
information on input mode operations.
13.Move to Advanced Function Setting Level (amoU)
This will be displayed only when the "initial setting/commu-
nications protection" in protect level is set to 0.
This setting enables the advanced function settings to utilize the
counter/timer functions to the maximum. To move to the
advanced function setting level, enter the password ( 169) from
the initial setting level.
H8GN
Preset Counter/Timer
C-73
Hide quick links:
Advertisement
Table of Contents
