Specifications - Omron H2C Manual

■ Accessories (Order Separately)
Name/specifications
Flush Mounting Adapter
Time Setting Ring (See note 1.)
Mounting Track
End Plate
Spacer
Protective Cover
Track Mounting/Front Connecting
Socket
Back Connecting Socket
Hold-down Clip (See note 3.)
Note: 1. Supplied with H2C-S/-SR models.
2. Y92A-48G is a finger safe terminal cover which is attached to the P3G-08 or P3GA-11 Socket.
3. Hold-down Clips are sold in sets of two.

Specifications

■ Time Ranges
Five time ranges are available for each timer by turning the time range selector every 60 degrees.
Note: Rated time is displayed on the window.
Time range code
A 1.25 to 30 s
B 0.2 to 6 s
C 0.5 to 12 s
■ Ratings
Item
Rated supply voltage (motor and
clutch)
Operating voltage range
Power consumption
Reset voltage
Reset time
Control outputs
Mounting method
Note: The front panel of the timer is color coded to identify the following supply voltage classifications:
100 to 120 V: Blue
200 to 240 V: Red
Other classes: Black
H2C
2
Motor Timer
50 cm (l) ´ 7.3 mm (t)
1 m (l) ´ 7.3 mm (t)
1 m (l) ´ 16 mm (t)
8-pin
8-pin, finger safe type
11-pin
11-pin, finger safe type
8-pin, screw terminal
8-pin, finger safe type
11-pin
11-pin, finger safe type
For PL08 and PL11 Sockets
For PF085A Socket
Position of time range selector
7.5 s to 3 min
2 to 60 s
5 to 120 s
24, 48, 100, 110, 115, 120, 200, 220, or 240 VAC (50/60 Hz) (see note)
85% to 110% of rated supply voltage
4.2 VA max. (3.96 W max.)
10% max. of rated supply voltage
Minimum power-opening time: 0.5 s
Minimum pulse width:
6 A at 250 VAC, resistive load (cos φ = 1)
Flush mounting (except for H2C-F/-FR models), surface mounting, DIN track mounting
Y92F-30
Y92A-Y1
PFP-50N
PFP-100N
PFP-100N2
PFP-M
PFP-S
Y92A-48B
P2CF-08
P2CF-08-E
P2CF-11
P2CF-11-E
P3G-08
P3G-08 with Y92A-48G (See note 2.)
P3GA-11
P3GA-11 with Y92A-48G (See note 2.)
Y92H-1
Y92H-2
1.25 to 30 min 7.5 min to 3 h
0.2 to 6 min 2 to 60 min
0.5 to 12 min 5 to 120 min
H2C
0.5 s
Models
1.25 to 30 h
0.2 to 6 h
0.5 to 12 h