Specifications - Omron H3CR Manual

H3CR-A

Specifications

■ General
Item
Operating mode
Pin type
Input type
Time-limit output type
Instantaneous output type ---
Mounting method
Approved standards
* The internal circuits are optically isolated from the output. This enables universal application as NPN or PNP transistor.
For details, refer to your OMRON website.
■ Time Ranges
Note: When the time setting knob is turned below "0" until the point where the time setting knob stops, the output will operate instantaneously at
all time range settings.
For details, refer to your OMRON website.
Standard (0.05-s to 300-h) Models
Time unit
Full scale 1.2
setting
3
12
30
Double (0.1-s to 600-h) Models
Time unit
Full scale
2.4
setting
6
24
60
5
H3CR-A/-AS/-A-301
A: ON-delay
B: Flicker OFF start
B2: Flicker ON start
C: Signal ON/OFF-delay
D: Signal OFF-delay
E: Interval
G: Signal ON/OFF-delay
J: One-shot
11-pin
No-voltage input Voltage input
H3CR-A/-A8/-AP/-A-301/-A8-301: Relay output (DPDT)
H3CR-AS/-A8S: Transistor output (NPN/PNP universal)*
DIN track mounting, surface mounting, and flush mounting
UL508, CSA C22.2 No.14, NK, Lloyds, CCC
Conforms to EN61812-1 and IEC60664-1 (VDE0110) 4kV/2.
Output category according to EN60947-5-1 for Timers with Contact Outputs.
Output category according to EN60947-5-2 for Timers with Transistor Outputs.
10 s (10 sec)
s (sec)
0.05 to 1.2 1.2 to 12
0.3 to 3 3 to 30
1.2 to 12 12 to 120
3 to 30 30 to 300
10 s (10 sec)
s (sec)
0.1 to 2.4 2.4 to 24
0.6 to 6 6 to 60
2.4 to 24 24 to 240
6 to 60 60 to 600
H3CR-AP H3CR-A8/-A8S/-A8-301
A: ON-delay (power supply start)
B: Flicker OFF start (power supply start)
B2: Flicker ON start (power supply start)
E: Interval (power supply start)
J: One-shot (power supply start)
8-pin
---
10 min (10 min)
min (min)
0.12 to 1.2 1.2 to 12
0.3 to 3 3 to 30
1.2 to 12 12 to 120
3 to 30 30 to 300
10 min (10 min)
min (min)
0.24 to 2.4 2.4 to 24
0.6 to 6 6 to 60
2.4 to 24 24 to 240
6 to 60 60 to 600
H3CR-A8E
Relay output (SPDT)
Relay output (SPDT)
10 h (10 hrs)
h (hrs)
0.12 to 1.2 1.2 to 12
0.3 to 3 3 to 30
1.2 to 12 12 to 120
3 to 30 30 to 300
10 h (10 hrs)
h (hrs)
0.24 to 2.4 2.4 to 24
0.6 to 6 6 to 60
2.4 to 24 24 to 240
6 to 60 60 to 600