Table of Contents
Advertisement
Component Names and Functions
•
LCD integrated type FZ2-300/FZ2-305/FZ2-500/FZ2-505
6 7
Power/
ground terminal
POWER LED
1
RUN LED
2
ERROR LED
3
•
Box type FZ2-350/FZ2-355/FZ2-550/FZ2-555
Monitor connector (analog RGB)
8
I/O connector (control lines, data lines)
4
1
Lit while power is ON.
2
Lit while the controller is in Run Mode.
3
Lit when an error has occurred.
4
Connect the controller to external devices such as a sync sensor and PLC.
5
Connect cameras.
6
Connect a DC power supply. Wire the power supply unit independently
of other devices. After wiring, replace the terminal cover.
Power Supply and Wiring p.3
7
Connect the ground wire. Make sure that the controller is grounded with a
separate ground wire.
8
Connect a monitor.
9
Connect an external device such as a personal computer or PLC.
10
Connect a track ball, mouse and USB memory. A total of four USB ports are provided and any of them can be
used. However, when connecting two or more USB memories, do not connect them to adjacent ports. Doing so
may cause the USB memories to come into contact, resulting in malfunction or damage.
• The following items can be connected to USB ports.
• Never insert/remove USB devices during measurement. Doing so may affect measurement time.
11
Connect the controller to a personal computer.
12
A touch pen is stored. (Provided with the LCD integrated type only)
• The touch pen must be stored so that the pen tip faces to the right when viewed toward the controller.
• To remove the touch pen, push the left side (handle) of the pen to the rear. The pen
hold and remove the pen.
5
Front view
Left-side view
USB connector
10
5
Camera connector
Ethernet connector
11
Power/ground terminal
6 7
Right-side view
Touch pen (holder)
12
POWER LED
1
RUN LED
2
ERROR LED
3
USB connector
10
RS-232C/RS-422 connector
9
Power Supply Wiring
• Commercially available track ball and mouse
'
s right side (pen tip) will pop out, so
RS-232C/RS-422
9
connector
I/O connector
4
(control lines, data lines)
Monitor connector
8
(analog RGB)
Ethernet connector
11
Camera connector
5
USB connector
10
24VDC
+
–
• USB memory
Advertisement
Table of Contents
