Omron F3SH-A Datasheet page 7

Safety Relay Unit
Appearance
Muting Controller
Appearance
Setting Console
Appearance
Branching Connector
Appearance
Single-ended Connector Cable (For Emitter and Receiver Set)
Appearance
Double-ended Connector Cable (For Emitter and Receiver Set)
Appearance
Note: 1. Cannot be used for series-connection purpose.
2. When two or more cables have to be used for connection with the G9SA-300-SC, connect the necessary number of F39-JC@B cables
to one F39-JC@C cable.
(Example) When a 35 m long cable is required, connect two F39-JC@B cables to one F39-JC@C.
F3SN-A/F3SH-A
Output
Relay, 3NO
Model
F3SP-U2P-TGR
F3SP-U4P-TGR
Model
F39-MC11
Model
F39-CN1
Cable length
3 m
7 m
10 m
15 m
Cable length Specification
0.2 m
0.5 m
3 m
5 m
M12 connector
(8 pins)
7 m
10 m
15 m
20 m
0.2 m
1 m
3 m
M12 connector
(8 pins)
7 m
10 m
15 m
Model
G9SA-300-SC
For connection with the F3SN-A, and F3SH-A, use F39-JC@A cables
fitted with connectors at single end.
One branching connector, one connector cap,
2-m cable, instruction manual
Purchase this connector when needed additionally for installing the
F39-MC11.
Specification
M 12 connector (8 pin)
Model
F39-JCR2B
F39-JCR5B
F39-JC3B
F39-JC5B
F39-JC7B
F39-JC10B
F39-JC15B
F39-JC20B
F39-JCR2C
F39-JC1C
F39-JC3C
F39-JC7C
F39-JC10C
F39-JC15C
Remarks
For connection with the F3SN-A, and
F3SH-A, use F39-JC@C cables fitted with
connectors at both ends.
Remarks
Accessories
Remarks
Model
F39-JC3A
F39-JC7A
F39-JC10A
F39-JC15A
Application
Series connection or
connection with F3SP-B1P
Connection with F3SP-B1P (see note 1)
Connection with G9SA-300-SC
(see notes 1 and 2)
G-9