Hysteresis (Heat); Hysteresis (Cool) - Omron E5CK User Manual

CHAPTER 5 PARAMETERS
Level 1 Mode
Manual reset value
Function
Setting

Hysteresis (heat)

Hysteresis (cool)

Function
Hysteresis (heat)
Setting
F
F
See
5–20
Setting Range
0.0 to 100.0
Parameter Setting Range
0.01 to 99.99
Hysteresis (cool) 0.01 to 99.99
Conditions of Use
The control must be either standard con-
trol or advanced PID control, and the "inte-
gral time" parameter must be set to "0".
Unit
%
Conditions of Use
The control system must be ON/OFF con-
trol.
Unit Default
%FS 0.10
%FS 0.10
Default
50.0