Specification Setting After Turning On Power - Omron E5 R Selection Manual

Specification Setting after Turning ON Power

Setting Level Configuration and Key Operations
Setting items are divided into "levels" and the settings are referred to as "parameters." With the E5AR/E5ER, setting items are classified into the
17 types shown below. When power is turned ON, all the indicators light for approx. 1 min before the Unit enters the operation level.
M
+
Display flashes
when pressed.
M
+
3 s
Protect level
Note: Depending on the model or settings, some levels may not be displayed.
40
Digital Controllers
Power ON
Adjustment level
Less than 1 s
Operation level
Less than 1 s
Monitor item level
M
+
1 s
Display flashes
1 s
when pressed
1 s
3 s
Less than 1 s
Input initial
setting level
Less than 1 s
Communications
1 s
Password input
setting " 169"
Advanced function Expansion control
setting level setting level
Password input
setting "1201"
Calibration level Note: Return from calibration level by resetting the power.
E5AR/E5ER
Adjustment 2 level
Less than 1 s
Less than 1 s
Approximation
setting level
Control stops.
Control initial Control initial
setting level setting level 2
Less than 1 s
Less than 1 s
Display
setting level adjustment level
Less than 1 s
Less than 1 s
Bank setting level
Less than 1 s
Less than 1 s
Less than 1 s
PID setting level
Less than 1 s
Alarm setting
level
Less than 1 s
Control in progress
Control stopped
(control stopped for all loops
with multi-input models)