Omron E5 R Selection Manual page 18

Dimensions
Note: All units are in millimeters unless otherwise indicated.
120 min.
Rubber Packing (Sold Separately)
Y92S-P4 (for E5AR)
If the rubber packing is lost or damaged, it
can be ordered using the following model
number: Y92S-P4.
(Depending on the operating environment,
deterioration, contraction, or hardening of
the rubber packing may occur and so, in
order to ensure the level of waterproofing
specified in NEMA4, periodic replacement is
recommended.)
Note: Rubber packing is provided with the
Controller.
Terminal Cover (Sold Separately)
E53-COV14 (for E5AR)
95
28.5
10.1
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
18
Digital Controllers
96
96
Panel Cutouts
+0.8
92
0
110 min.
+0.8
92
0
Recommended panel thickness is 1 to 8 mm.
Group mounting is not possible. (Maintain the
specified mounting space between Controllers.)
When two or more Controllers are mounted,
make sure that the surrounding temperature
does not exceed the allowable operating
temperature specified in the specifications.
95
E5AR
110
11.5 95 (99)*
2
3
1
2
3
4
5
6
1
2
3
4
5
6
* The value in parentheses is for
DeviceNet-compatible Controllers.
DeviceNet-compatible Controllers, Rear Panel
Unit Label Sheet (Sold Separately)
Y92S-L1
Terminal cover (E53-COV14; sold separately)
1
2
3
4
5
6
111
1
2
3
4
5
6
Crimp terminal size: M3
MS/NS indicators
Top: MS
Bottom: NS
DeviceNet communications
connector
Used to connect the DeviceNet
communications cables.
The DeviceNet communications
power is also supplied through
this connector.
The connector included with the
DeviceNet-compatible Controllers
is the FKC 2.5/5-STF-5.08 AU M
(PHOENIX CONTACT).
11.8
1
2
3
4
5
6
1
2
3
4
5
6
4.8