Omron E3X-NL Datasheet page 4

Rating/Performance
Amplifier Units
Item Model
Light source (wave length) Red LED (680 nm)
Power supply voltage
Current consumption
Control output
Answer-back output
Remote teaching input
Protective circuits
Response time
Sensitivity adjustment
Timer function *
Ambient illuminance
Ambient temperature
Ambient humidity
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Protective structure
Connection method
Weight (Packed state)
Case
Mate-
Cover
rial
Mounting Brackets Stainless steel (SUS304)
Accessories
* The OFF-delay timer can be reset by setting the switch.
Fiber Units
Sensing method
Features
Item Model
Sensing distance
Min. sensing object
Sensing object angle
Spot diameter
Ambient temperature
Ambient humidity
Permissible bending radius
Protective structure
Fiber length
Weight (Packed state)
Sensor case
Material Sensor window
Fiber cladding
A-200
12 to 24 VDC ±10%, ripple (p-p) : 10% max.
100 mA max.
Load supply voltage 30 VDC max., load current 100 mA max. (residual voltage 1 V max.)
Open collector output type (NPN output) Light-ON/Dark-ON switch selectable
Load power supply voltage 30 VDC max., load current 100 mA max. (residual voltage 1 V max.)
Open collector output type (NPN output)
Purple and blue (0 V) are connected when remote input turns ON: 0 V short-circuit current 1 mA max. Purple
and blue (0 V) are disconnected when remote input turns OFF: Open or 9 V min. (max. input voltage 24 V).
Note that the input is valid only when remote RUN/TEACH selection input (across pink-blue) is provided.
Protection from load short-circuit and reversed power supply connection
Operation or reset: 1 ms max.
Teaching system
OFF-delay fixed at 40 ms
Incandescent lamp: 3,000 lux max. Sunlight 10,000 lux max.
Operating: -25°C to 55°C, Storage: -40°C to 70°C (with no icing or condensation)
Operating: 35% to 85% RH, Storage: 35% to 95% RH (with no icing or condensation)
20 M min. at 500 VDC
1,000 VAC at 50/60 Hz for 1 minute
10 to 55 Hz, 1.5-mm double amplitude or 300 m/s
2
Destruction: 500 m/s for 3 times each in X, Y, and Z directions
IEC 60529 IP50 (with Protective Cover attached)
Pre-wired models (standard length: 2 m)
Approx. 200 g
PBT (polybutylene terephthalate)
Polycarbonate
Mounting bracket, instruction manual
Short-range small spot
E32-S15-1
10±3 mm (white paper, white glossy plastic
40x20 mm)
0.5-mm
Glossiness determination is possible at
inclination from the mounting hole (at sensing
distance of 10 mm)
Approx. 2-mm dia./approx. 2-mm dia. (at sensing
distance of 10 mm)
Operating: -25°C to 55°C, Storage: -40°C to 70°C (with no icing or condensation)
Operating: 35% to 85%RH, Storage: 35% to 90% RH (with no condensation)
4 mm min.
IEC 60529 IP50
500 mm
Approx. 50 g
Heat-resistant ABS resin
transparent glass
urethane
E3X-NL11
2
(approx. 30G) for 2 hrs each in X, Y, and Z directions
Reflective model
E32-S15-2
20±7 mm (white paper, white glossy plastic
40x20 mm)
2-mm
4° Glossiness determination is possible at
inclination from the mounting hole (at sensing
distance of 20 mm)
Approx. 15-mm dia./approx. 4-mm dia. (at sens-
ing distance of 20 mm)
1 m 500 mm
Approx. 60 g Approx. 80 g
Acrylics
Long-range
E32-S15L-1 E32-S15L-2
1 m
Approx. 90 g
Standard Photoelectric Sensors
7°