Advertisement
Rating/performance
Amplifier Units
NPN output
Model
Item
PNP output
Light source (wave length) Red LED (680 nm)
Power supply voltage
Control output
Response time
Timer function
Ambient temperature
Vibration resistance
Shock resistance
Protective structure
Connection method
Case
Material
Cover
*1
If 8 or more units are installed side-by-side, the response time is 350 s max.
E32-@C200 + E3X-NA@V
Pre-wired
E3X-NA11V
E3X-NA41V
12 to 24 VDC ±10%, ripple (p-p): 10% max.
Load current 50 mA (residual voltage 1 V max. each) Open collector output type (depends on the NPN/PNP
output format) Light-ON/Dark-ON switch selectable
200 s max. for operation and reset respectively
OFF-delay timer: 40 ms (fixed)
Operating: Groups of 1 to 3 Amplifiers: -25 to +55°C, Groups of 4 to 11 Amplifiers: -25 to +50°C,
Groups of 12 to 16 Amplifiers: -25 to +45°C
Storage: -30 to +70°C (with no icing and condensation)
10 to 55 Hz with a 1.5 mm double amplitude for 2 hrs each in X, Y and Z directions
2
Destruction: 500 m/s
for 3 times each in X, Y, and Z directions
IEC 60529 IP66 (with Protective Cover attached)
Pre-wired models (standard length: 2 m)
PBT (polybutylene terephthalate)
Polyethersulfone (PES)
Connector type
E3X-NA14V
E3X-NA44V
*1
M8 connector
3
Advertisement
