Table of Contents
Advertisement
OMRON
Save Runtime As
Once the project has been compiled and run, the compiled version of the project may be saved into
another directory location or onto another disc for issue to the target equipment. CX-Supervisor asks
for a location and name for the runtime project. This is a standard Windows dialog and operation
depends on your operating system. Please consult your Microsoft documentation for full details. The
default file type is *.SR2.
Create Runtime Install Disk
A CX-Supervisor application can be packaged safely for authorised distribution by creating a runtime
install disk. The process copies all required files, plus files to install to the specific directory to be
used to distribute the runtime project. These files can be on a removable Memory Stick or later burnt
to a distribution CD or even to floppy disk if the project is small enough.
Click on Create Runtime Install Disc from the Project menu. The Save Runtime As dialog is
displayed ready to create an installation to the desired folder. Refer to chapter 6, Save Runtime As
for further information regarding the Save Runtime As dialog.
Note:
Note:
Note:
Note:
Note:
Note:
Note:
Release 2.0
The files are not compressed. This feature does not support large projects that need
to span multiple disks.
The Runtime environment itself is not copied and must still be installed from a
legitimate source
Any ActiveX components used are not copied and should be installed on the target
machine using the supplier's instructions.
Support files used by any ActiveX control cannot be detected and are not copied.
These will need to be added manually. This includes:
•
Omron OPC Client settings stored in .OPC file
•
Omron Industrial Component communication settings, stored in .MSC file
•
Any bitmaps when using Microsoft Image control
•
Any file linked to by an OLE object (objects with embedded files should be
OK)
Existing databases or those specified by dynamic connections cannot be detected
and are therefore not copied. These will need to be added manually.
Report Templates used by script cannot be detected and are therefore not copied.
These will need to be added manually.
Any User Settings files used by script (e.g. .CSV or .TXT files) cannot be detected
and are therefore not copied. These will need to be added manually.
CHAPTER 6 – Projects
Page 101
Advertisement
Table of Contents
