Table of Contents
Advertisement
OMRON
1, 2, 3...
Release 2.0
1.
Enter a title for the page in the Page Title: field up to a maximum of 32
characters.
2.
Add a description (if required) in the Page Description field.
3.
Enter the co-ordinates for the top-left corner of the page in the Top and Left
field. This value must be in pixels, and must be a positive integer between
0 and 2000. Alternatively, click on the Full Size pushbutton to fill the
runtime environment workspace.
4.
Enter the height and width measurements for the page in the Height and
Width fields. These values must be in pixels, and must be a positive integer
between 0 and 2000. Click on the Centre pushbutton to centre the page to
the graphics workspace.
5.
Select the border style for the page from the Border Style settings. The
default for this is Sizeable, as shown on the Page Properties dialog.
Changing the selection will update the shown preview.
6.
To prevent the title from being displayed, click the Display Title setting to
remove the check mark. The following change occurs in the dialog:
7.
To change the display mode, select Overlap, Replace or Popup in the
Display Mode setting. 'Popup' pages appear above all other page types,
'Overlap' pages can lie on top of other pages, and 'Replace' pages closes
any pages that overlap.
8.
To alter the colour of the page, click in the Demo Page Window area or
click on the Colour pushbutton. CX-Supervisor displays the Colour Palette
dialog:
CHAPTER 2 – Pages
Page 15
Advertisement
Table of Contents
