Table of Contents
Advertisement
OMRON
A tick next to the name indicates that it is currently displayed. CX-Supervisor saves the settings
when it is exited and restores them when it is next run.
The specific operation of the controls on the Control Bar is described in the following paragraphs.
Object Identification
When an object is created, CX-Supervisor gives it a unique identifier. This identifier consists of the
object type and a sequential number (starting at 1). For example, a text object could have an
identifier of TEXT_1; a polygon object could have an identifier of POLYGON_3 etc. The Object
Identification field displays a list of all current objects on a page.
The identification of an object can be changed by clicking on the entry in the Object Identification
control, typing over the entry and pressing <Return>. A confirmation box is provided to double
check the operation, click the OK pushbutton to proceed with the name change or the Cancel
pushbutton to abort the operation.
It can at times be difficult to select a particular object if it is mostly obscured by other graphic
objects. The Object Identification control allows an object to be selected by simply selecting its
name from the presented list. Click on the arrow button to display the list and select the desired
object. On selection the object is highlighted.
The following illustration shows the Object Identification control in de-selected state:
The following illustration shows the Object Identification control in selected state:
Raise Up One
The Raise Up One button allows an object which forms part of an overlapping group of
objects to be moved nearer the top of the group, one layer at a time. With an object selected,
clicking the pushbutton once moves the object up one layer. This continues until the object
is at the top. Clicking the pushbutton with the object at the top of a group has no effect.
The following example illustrates the state of a group of two objects before and after clicking the
Raise Up One button with the black round rectangle selected:
Revision 2.0
CHAPTER 1 – Graphics Editor
Page 5
Advertisement
Table of Contents
