Table of Contents
Advertisement
CHAPTER 6 – Projects
Amending a Project
To amend an existing project it must first be opened (assuming it is not already open). To open a
project select Open from the Project menu. CX-Supervisor displays the Open dialog. This is a
standard Windows dialog and usage depends on your operating system. Please consult your
Microsoft documentation
1, 2, 3...
Once the project is loaded, the various editing tasks required may be carried out (such as editing page
or graphics formats), as described in the other chapters of this manual.
Saving a Project
Once a project has been created it is wise to save it. It is good practice to ensure that projects are
saved regularly, in case of an event such as a power failure. To save a project, select Save from the
Project menu.
If this is the first time the project has been saved, the Save As dialog is displayed.
1, 2, 3...
Note:
Printing a Project
All of the printable views of the project can be printed together, including page layouts and all
scripts. This can be useful as a development aid, for maintenance and for project documentation.
1, 2, 3...
Page 78
1.
Locate the drive and directory where the desired project is stored.
2.
Select the desired project from the list presented.
3.
Click the Open pushbutton to load the project.
1.
Move to the location where the project is to be stored.
2.
Ensure that the Save as Type: field is set to CX-Supervisor Projects
(*.SCS).
3.
Enter a name for the project. The name under which the project was
created is offered as a default.
4.
Click the Save pushbutton to save the project.
Subsequent saves do not cause the Save Project As dialog to be displayed.
1.
Start CX-Supervisor and load the project to be printed.
2.
From the options dialog, select the items to print and press OK.
3.
Select the printer to print to and press OK.
OMRON
Release 2.0
Advertisement
Table of Contents
