Elatec TWN4 USB Front Reader Series User Manual page 5

refer to the information given by the manufacturer of their medical devices before using the readers
or any host device containing the readers.
Maintenance and cleaning
•
Any repair or maintenance work should be done by trained and qualified personnel only.
Do not try to repair or carry out any maintenance work on the product by yourself.
Do not allow any repair or maintenance work on the product by an unqualified or unauthorized third
party.
•
The RFID readers of the TWN4 USB Front Reader family do not need any special cleaning. However,
the housing of the readers may be carefully cleaned up with a soft, dry cloth and a non-aggressive
or non-halogenated cleaning agent on the outer surface only.
Make sure that the cloth and cleaning agent used to clean up the housing of the readers do not
damage the product or its components (e.g. label(s)).
Disposal
•
The product must be disposed of in accordance with applicable local regulations.
Product modifications
•
The product has been designed, manufactured and certified as defined by ELATEC.
Any product modification without prior written approval from ELATEC is prohibited and considered
improper use of the product. Unauthorized product modifications may also result in the loss of
product certifications.
If you are unsure about any part of the safety information above, contact ELATEC support.
Any failure to comply with the safety information given in this document is considered improper use.
ELATEC excludes any liability in case of improper use or faulty product installation.
© 2024 – ELATEC GmbH – TWN4 USB Front Reader family – user manual – DocRev01 – EN – 05/2024 Page 5 of 17