Controller Link Diagnosis - Omron CX-ONE - INTRODUCTION GUIDE 1 Introduction Manual

各種PLC
PLC Network
ネットワーク PLC
Start-Up
Start-Up
の立ち上げ
Right-click a DeviceNet
Unit under Target Device
in the online connection
information window, then
select [Connect]
DeviceNet NT Link
Start-Up Start-Up

Controller Link Diagnosis

Controller Link Diagnosis
Confirm that the Controller Link connection is correct with an upper level System.
Confirm that the Controller Link connection is correct with an upper level System.
⇒ Diagnosis result check OK
⇒ Diagnosis result check OK
(1) Connect to PLC online, then connect to Controller Link Unit through the online connection
information window.
(2) Next, select the Controller Link network tool.
Controller
CompoWay
Link
/F Start-Up
Start-Up
Saving Equipment
System Disass'y /
Config. Reass'y
System Controller
Config. Link
Verification Diagnosis