Program Debug - Omron CX-ONE - INTRODUCTION GUIDE 1 Introduction Manual

Online Debug on Reading
a Machine
Click
Click [Yes]
Online
Connection
Project
to PLC

Program Debug

Program Debug
Transfer programs and Unit setting parameters created by an offline project to the PLC.
In this example, data is sent at the same time to various Units using the batch transfer function.
Monitoring
Monitor ON/OFF status of contacts and coils.
Transferring
Program
to a
Debug
Machine
Current parameter
Current parameter
value is displayed.
value is displayed.
. . . ON/OFF of monitoring
Frame color changes to
Frame color changes to
a specified color during
a specified color during
Function Block execution.
Function Block execution.