Using a Programming Console
Panel Installation
4-1-2
Compatible Programming Consoles
154
The C200H-PRO27-E Programming Console can be installed in a control
panel as shown in the following diagram. (The C200H-ATT01 Mounting
Bracket is sold separately.)
Mounting Bracket
Panel thickness: 1.0 to 3.2 mm
Allow at least 80 mm for the cable connector above the Programming Con-
sole.
37
There are three Programming Consoles that can be used with the CPM2C:
The CQM1H-PRO01-E, the CQM1-PRO01-E, and the C200H-PRO27-E. The
key functions for these Programming Consoles are identical.
Mounting hole dimensions
(DIN43700 standards)
Two screws
15
At least 80 mm is required.
Either connector may
be used.
About 70 mm is required.
Section 4-1
+1.1
186
−0
+0.8
92
−0