Funn RIPPER Installation & Use Manual

Thank you for choosing Ripper clipless pedals for your mountain bike.
Proper installation is crucial for optimal performance and compliance with our warranty policy.
Follow these step-by-step instructions and illustrations carefully. Our product offers superior grip, durability, and performance.
Enjoy your new pedals and happy riding!
tools required
． Hex key 3mm
． Hex key 8mm
contents
． Pedals
． Traction pins
PEDAL installation
1. Identify the left and right side axles. The left-side axle has
a lathed mark on the axle head, whereas the right-side
pedal has no markings.
LEFT RIGHT
LEFT
3. Lightly lubricate the axle threads with anti-seize grease. Thread the axle into the crank hole with your fingers first. Please
follow the illustrated directions for tightening the left and right side pedals.
4. Insert a 8mm hex key to further tighten the screw to 34Nm (300 lb-in) torque and avoid excessive force.
LEFT
WWW.FUNNMTB.COM
RIPPER CLIPLESS PEDALS 2024.05.01 / REV. 2
1 SET
16 PCS
RIGHT
8mm
34 Nm
RIPPER CLIPLESS PEDALS
． Socket wrench 4mm
． Cleat kit
． Socket wrench 4mm
2. Use the 4mm socket wrench to install the traction pins
according to your preference.
34 Nm
8mm
INSTALLATION AND USE
1 SET
1 PC
4mm socket wrench
RIGHT