Draper 13885 Quick Start Manual
Draper 13885 Quick Start Manual

Draper 13885 Quick Start Manual

200kg low transmission jack

Advertisement

This document is part of the product; retain it for the life of the product, passing it on to subsequent holders.
Read this manual in full before attempting to assemble, operate, or maintain this product. Always use the
latest version of the product manual, available from drapertools.com/manuals
1. Intended Use
This product is designed for lifting and lowering
transmission systems and differentials within the
rated capacities during installation and removal. Any
other application beyond the conditions established
for use will be considered misuse. Draper Tools
accepts no responsibility for improper use of this
product.
Important: This product is NOT suitable for
elevating or supporting vehicles.
Part of our core range, this product is suitable for
regular use by enthusiasts and tradespersons alike.
2. Specification
Stock No.:
Part No.:
Rated. capacity:
Max. height:
Min. height:
Base dimensions:
Drive socket square drive size:
Saddle type:
Net weight:
200kg
LOW
TRANSMISSION
JACK
09021
3. Health and Safety
Instructions
Important: Read all the Health and Safety
instructions before attempting to operate, maintain
or repair this product. Non-compliance with these
instructions may result in injury or damage to the
user, the product or the load.
3.1 General Health and Safety
Instructions for this Product
• Only personnel who have read and understood
• Observe all standard safety precautions and good
13885
RC/TSL/50W
• Keep your work environment clear and well-lit,
200kg
• Before every use, inspect the jack for broken,
600mm
160mm
L 400 x W 417mm
1 ⁄ 2"
• DO NOT use this product if you suspect that it has
Fixed
19.55kg
• Ensure that the warning labels and safety
• Use the product only in the manner instructed in
• ONLY use spare parts supplied by Draper Tools.
• DO NOT use this product if you are tired or under
• ALWAYS wear eye protection and protective
this manual and are trained in the use of this
product and the relevant forces are authorised to
operate this device.
practices when in a workshop environment.
with bystanders at a safe distance.
cracked, loose or corroded parts.
Important: DO NOT use this product if it is
damaged in any way. Contact Draper Tools to
discuss repair and replacement options.
been subjected to abnormal loads or shock and
have it inspected by a qualified technician.
instructions on the product are visible and
legible.
this manual and DO NOT modify it in any way.
the influence of alcohol, drugs or other
medication.
gloves and footwear when operating the jack.
EN
Original Instructions
Version 1 – July 2023

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 13885 and is the answer not in the manual?

Questions and answers

Summary of Contents for Draper 13885

  • Page 1 Non-compliance with these for use will be considered misuse. Draper Tools instructions may result in injury or damage to the accepts no responsibility for improper use of this user, the product or the load.
  • Page 2 •  Keep loose-fitting clothes, jewellery and long hair tied • NEVER allow anyone to position themselves or other back to prevent it from snagging during operation. obstructions beneath the load during raising and lowering or below any load supported only by the • The wheels of this product DO NOT lock.
  • Page 3: Product Overview

    4. Product Overview 1. Raise the vehicle to an appropriate height and secure it on suitable supports (not supplied). 2. Move the jack into position beneath the vehicle. 3. Loosen the saddle tilt adjustment screws (6) and open the strap using the ratchet (4); see 6.2 Loosening the Strap.
  • Page 4 6. Using the Strap and Ratchet 6.2 Loosening the Strap 1. Pull the C-shaped pawl (11) away from the windlass Use the strap (7) and ratchet (4) to secure the load firmly (9) and fully open the ratchet handle (10) so the to the saddle.
  • Page 5: Maintenance, Storage And Disposal

    Warranty European conformity Should the tool develop a fault, return the complete tool to your nearest distributor or contact Draper Tools UK Conformity Assessed directly. Proof of purchase must be provided. If, upon inspection, it is found that the fault occurring is due to defective materials or workmanship, repairs will be carried out free of charge.
  • Page 6: Contact Details

    Telephone Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 General Fax: +44 (0) 23 8026 0784 Please contact the Draper Tools Product Helpline for repair and servicing enquiries. © Published by Draper Tools Limited © Published by Draper Tools Limited...

Table of Contents