Setting Up The 1575R Appliance - Check Point QUANTUM SPARK 1575R Getting Started Manual

Setting up the 1575R Appliance

1. Remove the Quantum Spark 1575R appliance from the shipping carton and place it on a
tabletop.
For other mounting options, see below.
2. Identify the network interface marked as LAN1. This interface is pre-configured with the
IP address 192.168.1.1.
Using the default SSID for a WiFi connection:
Note - This option is only available:
n When connecting the appliance for the first time and before running the First
Time Configuration Wizard.
n For one hour.
1. Connect the appliance cable and the WAN cable.
2. Use the SSID and password printed on the appliance sticker to connect to WiFi.
Note - Skip this step if connecting through LAN.
3. Browse to the default gateway IP address:
The Welcome screen of the First Time Configuration Wizard appears.
4. Click Fetch Settings from the Cloud.
5. In the new window, click Yes to confirm that you want to proceed.
6. The Internet connection page of the First Time Configuration Wizard
7. From the Connection type drop-down menu, select Static IP.
8. Click Connect.
The One Touch status bar starts to run.
Note - If you were connected to WiFi: After the One Touch script finishes running, the
WiFi network you were connected to is deleted. As a result, you are disconnected
from the appliance.
https://192.168.1.1:4434
Quantum Spark 1575R Appliance Getting Started Guide | 10
Setting up the 1575R Appliance