Vivo CHAIR-CL02B Instruction Manual
Vivo CHAIR-CL02B Instruction Manual

Vivo CHAIR-CL02B Instruction Manual

Cross legged chair with wheels
Hide thumbs Also See for CHAIR-CL02B:

Advertisement

Cross Legged Chair
with Wheels
SKU: CHAIR-CL02B
Instruction Manual
Assembly Video & Product Info
www.vivo-us.com/products/chair-cl02b

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CHAIR-CL02B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vivo CHAIR-CL02B

  • Page 1 Cross Legged Chair with Wheels SKU: CHAIR-CL02B Instruction Manual Assembly Video & Product Info www.vivo-us.com/products/chair-cl02b...
  • Page 3 If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
  • Page 4: Package Contents

    Package Contents D (x1 ) B (x1) A (x1) C (x1 ) E (x1) Adjustment Gas Spring Lower Support Base Back Rest Screw Support F (x1) G (x1) H (x1) I (x1) J (x5) Back Rest Pad Seat Pad Foot Pad Back Rest Casters Bracket...
  • Page 5: Assembly Steps

    ASSEMBLY STEPS STEP 1 Connect Casters (J) to underside of Base (A). STEP 2 Secure the Foot Pad (H) to the Lower Support (C) using the M6x20mm Screws (S-A) and 5mm Allen Wrench (T-A).
  • Page 6 STEP 3 Slide the Gas Spring (B) through the Lower Support (C). Secure using the M8x22mm Screws (S-C) and 5mm Allen Wrench (T-A). Note: Positioning of Lower & Upper Collar (B1,B2) should not adjusted until final step. STEP 4 Insert the lower chair assembly into Base (A).
  • Page 7: Mounting Positions

    STEP 5 Slide the Back Rest Support (E) into the bracket on the underside of the Seat Pad (G). Choose one of the available mounting positions and secure the Back Rest Support (E) using the M8x30mm Screws (S-D) and 5mm Allen Wrench (T-A). The hole set closer to the middle of the Seat Pad (G) will position the Back Rest (installed in later step) further up, and the rear-set hole position will set it further back.
  • Page 8 STEP 6 Place upper chair assembly on Gas Spring (B). If you find that the Seat (G) lowers too far down, you can adjust the Minimum Height, restricting how far down the Seat can lower. then you may want to set a minimum height. Use the 5mm Allen Wrench (T-A) to loosen the Adjustment Screw on the Lower Collar and slide it down to the desired position to minimum height setting.
  • Page 9 STEP 5 Attach Back Rest Bracket (I) to Back Rest Pad (F) using M6x16mm Screws (S-B) and 5mm Allen Wrench (T-A). Choose your preferred height on Back Rest Support (E) and secure assembled back rest using Adjustment Screw (D).
  • Page 10 STEP 6 Adjust the height of the seat by pulling the handle below the Seat Pad (G). The height of the Foot Pad (H) can be adjusted by loosening the screws on Lower Support (C) using the 5mm Allen Wrench (T-A).
  • Page 11 [ THIS PAGE INTENTIONALLY LEFT BLANK ]...
  • Page 12: Last Updated

    LAST UPDATED: 4/11/24 REV2 v2.0 Need Help? Get In Touch Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com 309-278-5303 Chat live with an agent! FOR MORE GREAT VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM VIVO-us @vivo_us...

Table of Contents