Set Up Poly Tc10 For The First Time As A Paired Device - Polycom TC10 Admin Manual

4. Select Get Started.
The System Overview screen displays.
5. To configure the settings in the network details and regional info tiles, select the tile. To proceed,
select the next arrow.
The Setup Mode screen displays
6. Select Scheduling Panel/Standalone Mode, then select the next arrow.
7. To onboard your device to Poly Lens, follow the instructions onscreen. Otherwise select Skip.
NOTE:
This pincode is also available at any time in the Poly Lens section of the touch controller
interface admin settings.
The Choose a Video Provider screen displays.
8. Select your preferred provider, then select the next arrow.
The provider app installs and launches.
NOTE: Once you set up the Poly TC10 device in standalone mode, access network and system
settings, security settings, and diagnostics tools and logs in the Poly TC10 web interface. For more
see Access the Poly touch controller system web interface on page

Set up Poly TC10 for the first time as a paired device

When paired with a Poly video system, you can use Poly TC10 to control the video system. In paired
mode, Poly TC10 supports all Poly partner modes.
NOTE: To add additional touch controllers to an existing video conferencing system, add them
from the video conferencing system web interface.
1. Power on the Poly TC10 device by connecting it to a PoE-enabled Ethernet switch on the same
network as the conferencing PC.
2. If a Poly TC10 software update is available, select Update.
The Poly TC10 device updates and restarts.
3. Optional: Select the default language to change it, or choose dark mode by toggling to the moon
icon.
4. Select Get Started.
The System Overview screen displays.
5. Select Room Controller, then select the next arrow.
The Connect to a Room screen displays.
6. The system searches for devices with which to pair.
IMPORTANT:
to a room.
12 Chapter 3 Setting Up the Poly TC10
You are prompted to onboard the device to Poly Lens using an onboarding pincode.
In this initial release of TCOS 6.0.0, you must manually pair your touch controller
17.