T-Rex X-Metal Series Manual

Parts included
(1) X-Metal Grille Assembly
Main Part #6715471 or
(1) STEALTH Metal Grille Assembly
Main Part #6715471-BR
(1) Universal X-Metal Logo Badge
Hardware included
Installs using OEM Factory Grille
Hardware
Tools Required
- Screwdriver set (Long Flat Head)
- Metric Socket Set
- Ratchet Tool
- 1/2" Plastic Spatula Prying Tool
- Pocket Knife
Page 1
X-Metal SERIES Grille
Main grille - #6715471, #6715471-BR
2017 F-250 / F-350 / Super Duty
GRILLE REMOVAL & Grille Installation Guide
START HERE
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
Auto makers off er varied models to each vehicle and occasionally manufacture more
than one body style of the same model. To assure your part is correct; our tech
department can be contacted at tech@trexbillet.com to verify fi tment and assist with
technical questions. All other inquires can be directed to info@trexbillet.com. In the
event you do not have internet access please call 1-800-287-5900.
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINNING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR GRILL.
FRONT BUMPER REMOVAL
STEP 1
1) Turn off engine and chock tires
with stop block. Open Hood.
FIG 1
STEP 2 SEE FIGURE 1 & 2
2) Identify & locate plastic push fasteners
on top of shroud. Carefully pry off to
remove fasteners and then set aside for
reinstallation later.
STEP 3
3) Remove plastic shroud and then
set aside for reinstallation later.
PRO TIP:
Before you begin, use "3M Painters Tape" to
apply a protective guard around the work areas.
Attend to the fender and bumper valance. This will
help protect the paint and fi nish of your vehicle.
FIG 2