Angelo Decor Poplar AD96055 Instructions

Poplar Cascade Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Align the cord from the pump
with the cord grove and slide
the pump access door in
place.
The light connection
should remain outside the
fountain.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Retrieve the light connection
and cord from inside the
fountain. Attach the cord to
the power supply using the
threaded connection.
Install the decorative birds as
shown above.
Locate the tubing and attach
it to the pump as shown
above.
AD96055
With the tubing attached,
place the pump inside the
access hole at the back of
the fountain.
Printed in China