Angelo Decor Corra AD96038 Instructions

Corra Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Align the cord from the pump
with the cord grove.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Locate the cable from the
light and securely attach it to
the cord from the pump using
the threaded connection.
Slide the pump access door
in place.
Locate the tubing and attach
it to the pump as shown
above.
AD96038
With the tubing and light
connection attached, place
the pump inside the access
hole at the back of the
fountain.
Printed in China