Sennheiser EK 2013 PLL - ANNEXE 341 Instructions For Use Manual page 34

Receiver EK 2013 PLL
Frequency range EK 2013-6-D
Frequency preparation
Modulation type
Rated lift/peak lift
Channel grid/switching band width
Sensitivity
(measured via artificial antenna)
Neighboring channel selection
LF transmission range
Nonlinear distortion factor
at 1 kHz and rated lift
LF output 1:
LF output 2:
Impedance at LF output 2
for connection of hearing aids
in normal operation
with activated automatic fade-in
Operating voltage 2.4 V
Current consumption
Operating time
pack
Battery check
Dimensions
Weight (incl. B 2013)
German ZZF Certification No.
Scope of delivery
Not responsible for errors. Subject to change without notice.
EK 2013-6-1
EK 2013-6-2
EK 2013-6-3
EK 2013-8
EK 2013-9
8 kHz / 12 kHz
3.5 mm dia. jack
2.5 mm dia. jack
8 m frequency band
8 m frequency band
8 m frequency band
8 m frequency band
4 m frequency band
2 m frequency band
Phase Lock Loop (PLL) Technique, 16 channels
FM
EK 2013-6-D
EK 2013-6-1
EK 2013-6-2
EK 2013-6-3
EK 2013-8
EK 2013-9
typ. 0.5 V for 26 dB S/N
typ. 70 dB
40 - 16,000 Hz
typ. 1 %
High:
Low (hearing aids):
3 k
80 U to 1 kU adjustable
approx. 45 mA
> 14 hours with RECHARGEABLE battery
BA 2013
> 40 hours with 2 x Alkaline AA cells in B 2013
red LED for operating voltage < 2.2 V
18 x 58 x 95 mm
approx. 130 g
A 014 926 B ME (only -6)
1 Receiver EK 2013 PLL
1 Battery compartment B 2013
Technical data
36.64-37.98 MHz
30-36 MHz
35-40 MHz
39-45 MHz
72.025-75.975 MHz
173.350-175.02 MHz
40 kHz / 2.34 MHz
40 kHz / 2 MHz
40 kHz / 2 MHz
40 kHz / 2 MHz
25 kHz / 4 MHz
25 kHz / 2 MHz
2 x 0.7 V / 32 U
2 x 3 mV / 2 k
2.16