HPRT Apollo Pro Quick Start Manual

Quick Start Guide
Apollo Pro
Cau�on:
This is a Class A product. In a domes�c environment this
product may cause radio interference in which the user
may be required to take adequate measures.
Xiamen Hanin Co.,Ltd.
ADD: No.96, Rongyuan Road, Tong'an District, Xiamen, Fujian, China 361100
WEB： www.hprt.com
-1-
Packing List
Printer AC Adapter Power Cord
Label Roll CD Quick Start Guide
！
Note: The packing items are actually based on the order.
Appearance and Components
①
② ④
⑥
③
⑤
⑦
⑪
⑫
！
Note: The interface shown in the figure above is for reference only.
-2-
FCC WARNING：
This device complies with part 15 of the FCC Rules.
Opera�on is subject to the following two condi�ons:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including
sired opera�on.
USB Cable Ribbon Core
Any changes or modifica�ons not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are
Ribbon Spindles Ribbon
designed to provide reasonable protec�on against
harmful interference when the equipment isoperated
in a commercial environment. This equipment
generates, uses, and canradiate radio frequency
①Power Bu�on
energy and, if not installed and used in accordance
②Display
with the instruc�on manual, may cause harmful
③Printer Cover interference to radio communica�ons. Opera�onof
④Feed Bu�on this equipment in a residen�al area is likely to cause
⑧
harmful interference in whichcase the user will be
⑤Cover Open Levers
⑨ required to correct the interference at his own
⑥USB Port(Type A)
expense.
⑩
⑦USB Port(Type B)
-- Reorient or relocate the receiving antenna.
⑧Serial Port
-- Increase the separa�on between the equipment and
⑨Power Receptacle
receiver.
⑩Ethernet Port
-- Connect the equipment into an outlet on a circuit
⑬ ⑪Moveable Roll Holders
different from that to which the receiver is connected.
⑫Locking Tab
⑰
-- Consult the dealer or an experienced radio/TV tech
⑬Mechanism Lock
nician for help.
⑭Moveable Label Guides
To maintain compliance with FCC's RF Exposure
⑮Label Sensor
guidelines, This equipment should be installed and
⑮
⑯Platen
operated with minimum distance between 20cm the
⑭
⑰Printer Mechanism
radiator your body: Use only the supplied antenna.
⑱Front Label Sensor
⑯
⑱
interference that may cause unde