Safety Instructions When Using The Rotary Hammer - DNIPRO M RH-100Q Operation Instructions Manual

– Remove any adjustment key before
turning on the power tool. A key left on
a rotating part can cause injury.
– Maintain stability and balance during
work. This will be a guarantee of reli-
able control of the power tool, in espe-
cially in unpredictable situations.
– Do not wear loose clothing or jewelry
while working. Keep hair and clothing
away from moving parts of the pow-
er tool. Loose clothing, jewelry or long
hair can be caught in moving parts of
the power tool.
– If means are available for connect-
ing suction or dust collection devic-
es, connect and use these devices cor-
rectly. The use of such devices reduces
the risks associated with the presence
of dust.
– Do not allow excessive self-confidence
that arises from regular use of power
tools. Self-confidence causes a care-
less attitude to the implementation
of safety principles and even ignoring
them. Any carelessness when operat-
ing a power tool can result in serious
injury in a matter of seconds.
Power tool use and care
– Do not overload the power tool. Use
the power tool for its intended pur-
pose. A properly selected power tool
will perform better and safer when per-
forming the work for which it is intend-
ed.
– Do not use a power tool if the switch
does not turn it on and off. Any power
tool with a faulty switch is dangerous
and requires repair.
– Before making any adjustments, chang-
ing accessories or packing the power
tool for storage, be sure to disconnect
the plug from the power source or re-
move the battery. Such precautions re-
duce the risk of accidentally turning on
the power tool.
– Keep the power tool out of the reach of
children and do not allow persons who
are not familiar with the safety instruc-
tions to work with it. In the hands of an
unfamiliar user, an electric tool is very
dangerous.
EU-RH0923001-0923001
– Take care of the power tool and its ac-
cessories. Check the absence of mis-
alignment or jamming of moving parts,
broken parts and other defects that
may affect the operation of the power
tool. In case of damage to the power
tool, contact the manufacturer (DNIPRO
M LLC), the DNIPRO-M authorised ser-
vice centre or the seller of the product.
Most accidents are caused by faulty
power tools.
– Keep cutting tools clean. Properly main-
tained cutting tools with sharp cutting
edges are less prone to warping and
work better.
– Use the power tool, accessories, etc. in
accordance with this instruction, taking
into account the conditions and type
of work. Using power tools for work for
which they are not intended can lead to
dangerous situations.
– Keep handles and grip surfaces clean,
free of oil or grease. Slippery handles
and gripping surfaces do not ensure
safe operation of the power tool.
Maintenance
For service and repair of the power
tool, contact the manufacturer (DNI-
PRO M LLC), the DNIPRO-M authorised
service centre or the seller of the prod-
uct. This will ensure the maintenance
of safety and serviceability of the pow-
er tool.
2. SAFETY INSTRUCTIONS WHEN
USING THE ROTARY HAMMER
An additional handle must be used during
work. Losing control of the power tool
can result in personal injury.
Hold the power tool by the insulated
gripping surfaces because the tool may
touch hidden wiring or its own power
cord during operation. If the accessory
comes into contact with a live wire, the
exposed metal parts of the power tool
may become live and cause an electric
shock to the operator.
During work, use eye, hearing, and
breathing protection.
en
5