Safety Instructions When Using A Rotary Hammer - DNIPRO M BH-20 Safety And Operating Instructions Manual

– Remove any adjustment key before
turning on the power tool. A key left on
a rotating part can cause injury.
– Maintain stability and balance during
work. This will be a guarantee of reli-
able control of the power tool, in par-
ticular in unpredictable situations.
– Do not wear loose clothing or jewelry
while working. Keep hair and clothing
away from moving parts of the pow-
er tool. Loose clothing, jewelry or long
hair can be caught in moving parts of
the power tool.
– If means are available for connect-
ing suction or dust collection devic-
es, connect and use these devices cor-
rectly. The use of such devices reduces
the risks associated with the presence
of dust.
– Do not allow excessive self-confidence
that arises from regular use of power
tools. Self-confidence causes a care-
less attitude to the implementation
of safety principles and even ignoring
them. Any carelessness when operat-
ing a power tool can result in serious
injury in a matter of seconds.
Power tool use and care
– Do not overload the power tool. Use
the power tool for its intended pur-
pose. A properly selected power tool
will perform better and safer when per-
forming the work for which it is intend-
ed.
– Do not use a power tool if the switch
does not turn it on and off. Any power
tool with a faulty switch is dangerous
and requires repair.
– Before making any adjustments, chang-
ing accessories or packing the power
tool for storage, be sure to disconnect
the plug from the power source or re-
move the battery. Such precautions re-
duce the risk of accidentally turning on
the power tool.
– Keep the power tool out of the reach
of children and do not allow persons
unfamiliar with the safety and operat-
ing instructions to work with it. In the
hands of an untrained user, an electric
tool is very dangerous.
EU-BH1023001-1023001
– Take care of the power tool and its ac-
cessories. Check the absence of mis-
alignment or jamming of moving parts,
broken parts and other defects that
may affect the operation of the pow-
er tool. In case of damage to the pow-
er tool, contact the manufacturer (DNI-
PRO M LLC), the DNIPRO-M authorized
service center, or the seller of the
product. Most accidents are caused by
faulty power tools.
– Keep cutting tools clean. Properly
maintained cutting tools with sharp
cutting edges are less prone to warp-
ing and work better.
– Use the power tool, accessories, etc. in
accordance with this instruction, tak-
ing into account the conditions and
type of work. Using power tools for
work for which they are not intended
can lead to dangerous situations.
– Keep handles and grip surfaces clean,
free of oil or grease. Slippery handles
and gripping surfaces do not ensure
safe operation of the power tool.
Maintenance
– For service and repair of the power
tool, contact the manufacturer (DNI-
PRO M LLC), the DNIPRO-M authorized
service center or the seller of the prod-
uct. This will ensure the maintenance of
safety and serviceability of the power
tool.
2. SAFETY INSTRUCTIONS WHEN
USING A ROTARY HAMMER
– An additional handle must be used
during work. Losing control of the pow-
er tool can result in personal injury.
– Hold the power tool by the insulated
gripping surfaces because the tool may
touch hidden wiring or its own power
cord during operation. If the accessory
comes into contact with a live wire, the
exposed metal parts of the power tool
may become live and cause an electric
shock to the operator.
– During work, use eye, hearing, and
breathing protection.
en
5