Table of Contents
Advertisement
ITC222-EN
17/07/03
16:59
Getting started
Remote control TV functions
Most of your television's functions are available via the menus that appear on the screen.The remote control supplied with
your set can be used to navigate through the menus and to configure all the general settings.The remote control and its
functions may vary depending on the model of television.The rest of this page contains the description of the most
comprehensive remote control. Optional remote control features are indicated by the symbol
EN
Important: If the batteries in your remote control are run down, you can use the buttons on the front of your set, as they have the same functions
as those on the remote control.
Page 4
TV
VCR
DVD
OK
PRESETS
LIST
INFO
GUIDE
TEXT
The coloured buttons can also be used for operating Teletext.
MENU
EXIT
RETURN
PR+/PR-
0-9
AV
Standby / quit standby.
To access TV mode. Press this button to control the television.
To access VCR mode.
To access DVD mode.
To access SAT mode.
SAT
To access AUX mode.
AUX
To access AMP mode.
AMP
To provide information:
light
- it lights up when you press a button,
- it indicates the status when the remote control is being
programmed (see page 5),
- if the batteries are run down, it flashes when you press a
button.
To enable the PIP function.
PIP
To swap the main picture with the PIP picture.
SWAP
To change programmes within the PIP function.
PIP+/PIP-
To change the size of the PIP picture.
ZOOM
To freeze the main picture.
FREEZE
To access directly the Sleep timer option in the Time
SLEEP
menu.
Remote control light.
LIGHT
To select menu options.
To set functions, change values, enable and disable functions.
4/3 models: to select the picture format.
16/9 models: to select the picture format or zoom.
To confirm a selection.
(red button) sound and picture settings menu
(green button) list of programmes
(yellow button) status information
(blue button) programme guide
(purple button) Teletext
To access the OVERVIEW menu.
To exit the menu structure.
In PIP mode: to disable the PIP function.
To control the volume.
+/-
This function is also available in VCR and DVD modes.
To switch the sound off and back on again.
To return to the previous channel/AV programme.
To change channels.
To select a channel by its number. In the case of channel
numbers with two digits:
- press the two digits quickly, or
- press 0 to display "--", then enter the channel number.
To select an appliance connected to an AV socket.
To access demo mode.
DEMO
4
.
Advertisement
Table of Contents
