Switching On - THOMSON ETC310 Manual

04_ETC_310_EN1 13/07/05
Follow the instructions on this page to use your TV set and the remote control unit before entering the channel set-up procedure
described on the next page.
More info
UK SOCKET
Equipment for the UK is supplied with a mains cable fitted with a
moulded plug.
11:50 Page 7 (Noir/Process Black film)
1.
2
3
4
The first time you switch on the television, the language selection menu appears.
5
Information about connecting other equipment to the AV (Audio-Video) sockets is given on
page 23.
Before referring to it, complete the initial channel set-up procedure on the next page to
avoid any problems with equipment selection.
The plug contains safety components and must not be replaced by one sold by
general retailers. It is fitted with a fuse that protects your television.
If your set has stopped working, the fuse may have blown.
If it has, replace it with an identical ASTA certified or BSI (BS1362) 5-amp fuse.
Insert two LR06 or AA batteries in the remote control.
Precautions on using batteries:
- Only use the battery types specified.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat, throw them in a fire, recharge them or
try to open them, as this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using it for a long
period of time (several weeks).
Connect the TV to a mains socket.
It is used to supply power to your TV which must only be supplied with
220 - 240 V ~ 50 Hz. It must not be connected to a D.C. network.
If the plug is detached from the wire, do not plug it into the mains under
any circumstance as there is a danger of electrocution.
Connect the outside aerial or cable network to the DIGITAL RF in socket at
the back of the TV set.
Check that your antenna is compatible with reception of digital channels.
The aerial socket (DIGITAL RF in) located at the rear of the TV set is
intended for the connection of an antenna or another set fitted with a modulator
(videorecorder, satellite receiver, etc.)
Do not disconnect the cable linking the connectors RF out and RF in.
We recommend that you do not initially connect other equipment to your TV (VCR,
decoder, etc.) so as not to complicate the set-up procedure with additional factors.
Connect them up when you have finished setting up the channels by referring to page
23 of the manual.
Switch the TV on by pressing the on/off button (A).
Depending on the model, this button is located on the front or side of
the set.
Now go to page 8 for information on the Initial set-up, or for
information on how to update your channels if the channels have already
been set up (if you have moved house, for instance).
Please respect the environment and the relevant regulations. Before you dispose of
batteries (or accumulators), ask your dealer whether they require special recycling and if
he is able to take them back.
7

Switching on

EN