Related Manuals for Joy-it RB-CaseP5-06W
Summary of Contents for Joy-it RB-CaseP5-06W
- Page 1 RASPBERRY PI 5 PLASTIC CASE RB-CaseP5-06W & RB-CaseP5-06B Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - D-47506 Neukirchen-Vluyn - www.joy-it.net...
-
Page 2: General Information
1. GENERAL INFORMATION Dear customer, thank you for choosing our product. In the following, we will show you what you need to bear in mind during commissioning and use. Should you encounter any unexpected problems during use, please do not hesitate to contact us. 2. - Page 3 Now attach the enclosed heat sink to your Raspberry Pi. To do this, remove the adhesive film from the thermal pad and place the heat sink in the following position: You can now connect the active cooler installed in the housing as standard or simply remove it from the housing.
- Page 4 Now reassemble the housing: Now turn the enclosure over and fit the enclosed rubber feet from below. Your housing is now fully assembled and ready for use!
-
Page 5: Other Information
SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn RETURN OPTION IN YOUR AREA: We will send you a parcel stamp with which you can return the device to us free of charge. To do so, please contact us by e-mail at Service@joy-it.net or by telephone. PACKAGING INFORMATION: Please pack your old appliance securely for transportation.
Need help?
Do you have a question about the RB-CaseP5-06W and is the answer not in the manual?
Questions and answers