Joy-it RGB SHIELD Quick Start Manual

Expansion board for arduino incl. 40 leds

RGB SHIELD

Expansion board for Arduino incl. 40 LEDs

1. GENERAL INFORMATION

Dear customer,

Thank you for purchasing our product. In the following, we will show you

which things should be noted during the use.

Should you encounter any unexpected problems, do not hesitate to

Table of Contents

Need help?

Do you have a question about the RGB SHIELD and is the answer not in the manual?

Page 1 RGB SHIELD Expansion board for Arduino incl. 40 LEDs 1. GENERAL INFORMATION Dear customer, Thank you for purchasing our product. In the following, we will show you which things should be noted during the use. Should you encounter any unexpected problems, do not hesitate to...
Page 2 2. CONNECTION Plug the expansion board onto the Arduino so that all pins of the board are connected to the Arduino. Further wiring is not necessary. 3. INSTALLATION OF THE LIBRARY For the LED matrix we use the library Adafruit NeoPixel, which is published by Adafruit...
Page 3 We will send you a parcel stamp with which you can send us your old appliance free of charge. For this possibility, please contact us via e-mail at pickup@joy-it.net or via telephone, then please dial 02845 93 60 -23 Information about Package: Please package your old appliance safe for transport.