Important Safety Information - Textron HD Electric DVM-80UVM Operating And Instruction Manual

IMPORTANT SAFETY INFORMATION

Read and understand these instructions prior to use. These operating instructions
are not a substitute for proper training in the use of this equipment. High voltage
systems present serious hazards, including the risk of death or serious injury due to arcing,
thermal burns and electrocution. HD Electric Company products are intended solely
for use by professionals with knowledge, training and experience in the use of the
equipment and its accessories in and around high voltage systems.
All applicable federal, state, company and OSHA work practices must be followed. If you
are unfamiliar with the work practices required, DO NOT PROCEED. Call HD Electric
Company if you have any questions regarding this equipment. These important labels
are affixed to the product. Read and understand each label before proceeding.
THESE IMPORTANT LABELS ARE AFFIXED TO THE PRODUCT.
READ AND UNDERSTAND EACH OF THEM BEFORE PROCEEDING.
All meters require the use of accessory hotsticks, which may or may not be supplied with
the meter. The minimum hotstick length required for safe use depends upon the particular
operation; consult federal, state, company and OSHA specifications for the proper hotstick
length for the intended operation.
The users of this meter should always be equipped with personal protective equipment
including high voltage gloves, flame retardant clothing, eye and face protection. Some
applications may require additional protective equipment.
Accessory probes are available for all meters. Always use the proper probe(s) for
your application.
OPERATIONAL IMPAIRMENT - If the DVM is used in a manner not described in this instruction
manual, the protection and effective operation of this equipment may be impaired.
Failure to follow these and other warnings and safety precautions may result in
severe injury or death.
4
D NGER
Keep Connecting Cord
Free and Clear of Everything
At All Times During Operation.
See Instructions
#VMCWL-96
D NGER
ELECTRIC SHOCK H Z RD
ELECTRIC L
RE D INSTRUCTIONS
M NU L BEFORE USE
lways wear personal protective equipment including eye and face
protection, insulating gloves and FR clothing.
ll OSH and company work practices must be followed.
lways maintain proper working clearances.
Use only HD Electric probes appropriate and intended for the work
to be performed.
This product is designed for use by professionals trained in its use
and application in and around high voltage electrical equipment. If
you are not trained in the work methods required for safe operation,
DO NOT PROCEED until you obtain the proper training.
Failure to follow these recommended practices may result in severe
burns, serious injury or death.
HD Electric Company
www.hdelectriccompany.com
W A R N I N G
HOT STICK REQUIRED
W A R N I N G
RC H Z RD
ND OPER TIONS
Phone: (847) 473-4980