Vestil EHLT-TL Series Manual

Vestil EHLT-TL Series Manual

Electric hydraulic scissors lift tables

Advertisement

Quick Links

Operator's Manual
EHLT-TL Series Electric Hydraulic Scissors Lift Tables
Receiving instructions
After delivery, remove the packaging from the product. Inspect the product to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of it on the bill of
lading and file a claim with the carrier immediately! If the product is undamaged, discard the packaging.
NOTE: The end user is solely responsible for confirming that product design, use, and maintenance comply with
laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance
If you have questions that are not addressed in these instructions, or to order replacement parts, labels,
and accessories, call (260) 665-7586 and ask for the Service and Parts Department. You can also reach Service
and Parts online at https://www.vestil.com/page-parts-request.php.
Electronic Copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Table of Contents
10/23/2023
Model EHLT-TL
Copyright 2023 Vestil Manufacturing Co.
Vestil Manufacturing
Company
A company dedicated to solving loading dock and
material handling problems since 1955.
2999 North Wayne Street, P.O. Box 507,
Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free:
(800) 348-0868
Fax: (260) 665-1339
http://www.vestil.com/
https://www.vestil.com/page-
EHLT-TL MANUAL
info@vestil.com
Page 1 of 22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EHLT-TL Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vestil EHLT-TL Series

  • Page 1 (800) 348-0868 Fax: (260) 665-1339 http://www.vestil.com/ info@vestil.com EHLT-TL Series Electric Hydraulic Scissors Lift Tables Model EHLT-TL Receiving instructions After delivery, remove the packaging from the product. Inspect the product to determine whether it sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading and file a claim with the carrier immediately! If the product is undamaged, discard the packaging.
  • Page 2: Signal Words

    SAFETY INSTRUCTIONS Vestil Manufacturing strives to identify all foreseeable hazards associated with the use of its products. However, material handling is dangerous and no manual can address every risk. The end user is ultimately responsible for exercising sound judgment at all times in the use of this product.
  • Page 3 The lift table’s load capacity must never be exceeded, as permanent damage or personal injury may result. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 3 of 22...
  • Page 4 Operator’s Manual 10/23/2023 EHLT-TL MANUAL EXPLODED PART VIEW AND BILL OF MATERIALS: EHLT-TL-#####-#-## Bill of Materials on pages 5-6 24-006-983 Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 4 of 22...
  • Page 5 1/2 - 13 HEX JAM NUT PLAIN, GRADE A 1.1.2.20 32415 Ø5/16 - 18 x 1/2 HWH THREAD CUTTING SCREW, TYPE F, ZINC 1.1.2.21 01-115-002 WASHER, THRUST BEARING 1.1.2.22 01-115-001 WASHER, THRUST BEARING, 1 1/8 ID Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 5 of 22...
  • Page 6 NOTE: Quantities given for items numbered 1.1.2 through 1.1.2.22 (shaded) are for just one leg set. EHLT-TL lift tables include 2 leg sets, and therefore, overall quantities are double the quantities shown for those items. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 6 of 22...
  • Page 7 HEX BOLT, GRADE A, ZINC PLATED, 1/4"-20 X 3" 33004 FLAT WASHER, USS, ZINC PLATED, Ø1/4" 24189 #8-32 FHSCS 01-015-017 TOE GUARD, LIMIT SWITCH ACTUATOR * Item attaches separately to platform. † Item attaches to base. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 7 of 22...
  • Page 8 115 VAC, Single-Phase Electric Circuit Diagram (24124012 Rev. B) Note: Overcurrent & short circuit protection and disconnect must be provided by end user. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 8 of 22...
  • Page 9 Note: Overcurrent & short circuit protection and disconnect must be provided by end user. Three-Phase Electric Circuit Diagram (24124014 Rev. B) Note: Overcurrent & short circuit protection and disconnect must be provided by end user. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 9 of 22...
  • Page 10: Motor Lead Connections

    Polarity across the thermostat leads is not important. When changing the motor voltage configuration, you must also change the configuration of the control transformer to match the motor voltage. Control Voltage Transformer (01129001 Rev. G). Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 10 of 22...
  • Page 11 O-RING, MANIFOLD, 99-144-009 3/4" OD VALVE, PRESSURE 99-153-006 RELIEF, 210 BAR CHECK VALVE, SIZE 08, 99-153-011 NOSE-IN/SIDE-OUT VALVE SOLENOID, 99-153-015 STANDARD 99-153- FLOW CONTROL, PRES. 040-001 COMP., 2.0 GAL. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 11 of 22...
  • Page 12: Installation Instructions

     A power supply and electrical disconnect matching the motor’s voltage and current requirements. Refer to the lift table’s data plate, labels on the control enclosure, and the electrical diagrams in this manual for Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 12 of 22...
  • Page 13: Installation

    Lower the platform until the props slide up against the end of the base frame. See diagram on following page. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 13 of 22...
  • Page 14 9. Clean up any debris or spilled oil. Verify that all of the information, safety, and warning labels are in good, easily readable condition. See Labeling Diagram on p. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 14 of 22...
  • Page 15 EHLT-TL series scissor lift tables are suitable for use indoors in most non-classified industrial locations and many commercial locations. They are intended to lift stable, evenly-distributed, nonhazardous materials loads having a size or footprint approximately the same size as the platform.
  • Page 16: Operation

    Only use manufacturer-approved replacement parts. Contact Technical Service if you have questions that are not addressed in these instructions or Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 16 of 22...
  • Page 17: Monthly Inspection

    5. Integrity of the retaining hardware on all rollers and all pivot point pins. 6. Integrity of the frame anchor bolts, and for cracks in the concrete around them. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 17 of 22...
  • Page 18 Make sure the screen filter is in place and seated at the bottom of the threads on the valve body (illustration). k. Reinstall the solenoid valve, tightened to 20 ft-lb of torque. Reattach the solenoid coil and the retaining nut. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 18 of 22...
  • Page 19 There is a cylinder attached to each leg set and each cylinder has a bleeder valve. It is recommended the 2 people, 1 on each cylinder, work together to bleed air from the system. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 19 of 22...
  • Page 20: Troubleshooting Guide

    Flow control valve spool sticking. “Inspection and Maintenance” section. Remove and inspect valves. Clean per instructions in Platform lowers too quickly. Flow control valve spool sticking. “Inspection and Maintenance” section. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 20 of 22...
  • Page 21: Labeling Diagram

    F: Label 824 (both sides) G: Label 208 (both leg sets; both sides) H: Label 204 (both ends of base frame) I: Label 269 (both sides; both ends of base frame) Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 21 of 22...
  • Page 22: Limited Warranty

    Vestil Manufacturing Co. makes no other express warranties. All implied warranties are disclaimed to the extent allowed by law. Any implied warranty not disclaimed is limited in scope to the terms of this Limited Warranty. Vestil makes no warranty or representation that this product complies with any state or local design, performance, or safety code or standard.

Table of Contents