Table of Contents
Advertisement
Quick Links
TABLE OF CONTENTS
EHLTD-Series Double Scissor Electric-Hydraulic Lift Tables
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The Department can
also be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic Copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Signal
Words..........................................................................................................................
Safety Instructions and Notice about Proper Use and
Complete Unit Exploded Views and Bills of
Electric Circuit
Diagrams: 115VAC; 203-230VAC; 3-Phase..........................................................
Motor Lead
Connections.......................................................................................................
Control Voltage
Transformer...................................................................................................
Power Unit
Subassembly:
Hydraulic
Schematic.............................................................................................................
Installing the
Table.................................................................................................................
Record of Satisfactory
Condition............................................................................................
Operating the
Table...............................................................................................................
Inspecting and Maintaining the
Bleeding Air from the Hydraulic
Troubleshooting
Guide...........................................................................................................
Labeling
Diagram.........................................................................................................................
Limited
Warranty...................................................................................................................
TABLE OF CONTENTS
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
www.vestilmfg.com
Table of Contents
Materials................................................................
Power
Unit;
Manifold
Assembly..........................................................
Table.....................................................................................
Cylinder(s)..............................................................................
Copyright 2021 Vestil Manufacturing Corp.
Rev. 2/2/2022
Fax: (260) 665-1339
Maintenance............................................
EHLTD MANUAL
e-mail:
info@vestil.com
https://www.vestil.com/page-
23, 24, 25
Page 1 of 28
Page
2
2
-
3
4
-
15
16,
17
18
18
19
20
20,
21
22
22,
23
25
26
27
28
Advertisement
Table of Contents
Related Manuals for Vestil EHLTD Series
Summary of Contents for Vestil EHLTD Series
- Page 1 For answers to questions not addressed in these instructions and to order replacement parts, labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The Department can also be contacted online at https://www.vestil.com/page-parts-request.php. Electronic Copies of Instruction Manuals Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-...
-
Page 2: Signal Words
SAFETY INSTRUCTIONS Vestil strives to identify all hazards associated with the use of our products. However, material handling is dangerous and no manual can address every risk. The most effective way to avoid injury is for the end-user to exercise sound judgment whenever using this product. - Page 3 150 SUS at 100°F, (ISO 32 cSt @ 40°C), or Dexron transmission fluid. • Contact the manufacturer for SDS (Safety Data Sheet) documentation TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 3 of 28...
- Page 4 TABLE OF CONTENTS Rev. 2/2/2022 EHLTD MANUAL EXPLODED VIEW: EHLTD-4848-0.7-70 + ROTATE (26-006-114-001) TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 4 of 28...
- Page 5 64134 SPRING PIN 26333 SHOULDER SCREW, GRADE 2, 0.375x1.5" LG 26-513-013 WELDMENT, DECK, 48" X 48", ROTATE 01-515-013 SUB-ASSEMBLY, TOE GUARD, 48" X 48", INCLUDES HARDWARE & SWITCHES TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 5 of 28...
- Page 6 TABLE OF CONTENTS Rev. 2/2/2022 EHLTD MANUAL EXPLODED VIEW: EHLTD-4848-1/2/3/4-70 (26-006-111-002) TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 6 of 28...
- Page 7 FLAT WASHER, USS, ZINC PLATED, Ø1/4" 33004 SPRING PIN 64134 SHOULDER SCREW 0.375x1.5" LG 26333 WELDMENT, DECK 26-513-005 SUB-ASSEMBLY, TOE GUARD, 48" X 48", INCLUDES HARDWARE & SWITCHES 01-515-013 TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 7 of 28...
- Page 8 TABLE OF CONTENTS Rev. 2/2/2022 EHLTD MANUAL EXPLODED VIEW: EHLTD-4848-5-70 (26-006-151-002) TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 8 of 28...
- Page 9 FLAT WASHER, USS, ZINC PLATED, Ø1/4" 64134 SPRING PIN 26333 SHOULDER SCREW 0.375x1.5" LG 24-112-003 PIN, CYLINDER PIVOT 26-513-005 WELDMENT, DECK 01-515-013 SUB-ASSEMBLY, TOE GUARD, 48" X 48", INCLUDES HARDWARE & SWITCHES TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 9 of 28...
- Page 10 TABLE OF CONTENTS Rev. 2/2/2022 EHLTD MANUAL EXPLODED VIEW: EHLTD-4864-1-84 (26-006-061-002) TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 10 of 28...
- Page 11 SPRING PIN 99-115-001 WASHER, THRUST 99-021-901-001 CYLINDER, HYDRAULIC, Ø3" x 10" RAM STYLE, MACHINED END 26-513-004 WELDMENT, DECK SUB-ASSEMBLY, TOE GUARD, 48" X 64", INCLUDES HARDWARE & 01-515-026 SWITCHES TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 11 of 28...
- Page 12 TABLE OF CONTENTS Rev. 2/2/2022 EHLTD MANUAL EXPLODED VIEW: EHLTD-4864-2-84 (26-006-071-002) TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 12 of 28...
- Page 13 99-115-001 WASHER, THRUST CYLINDER, HYDRAULIC, Ø3" x 10" RAM STYLE, MACHINED END, 2GPM 99-521-901-001 26-513-004 WELDMENT, DECK SUB-ASSEMBLY, TOE GUARD, 48" X 64", INCLUDES HARDWARE & 01-515-026 SWITCHES TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 13 of 28...
- Page 14 TABLE OF CONTENTS Rev. 2/2/2022 EHLTD MANUAL EXPLODED VIEW: EHLTD-4864-3/4/5-84 (26-006-081-002) TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 14 of 28...
- Page 15 CYLINDER, HYDRAULIC, Ø3" x 10" RAM STYLE, MACHINED END, 2GPM 99-521-901-001 VELOCITY FUSE 24-112-003 PIN, CYLINDER PIVOT 26-513-004 WELDMENT, DECK SUB-ASSEMBLY, TOE GUARD, 48" X 64", INCLUDES HARDWARE & 01-515-026 SWITCHES TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 15 of 28...
-
Page 16: Electric Circuit Diagrams
115 VAC, Single-Phase Electric Circuit Diagram (24124012 Rev. A) Note: Overcurrent & short circuit protection and disconnect must be provided by end user. TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 16 of 28... - Page 17 Note: Overcurrent & short circuit protection and disconnect must be provided by end user. 3-Phase Electric Circuit Diagram (24124014 Rev. A) Note: Overcurrent & short circuit protection and disconnect must be provided by end user. TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 17 of 28...
-
Page 18: Motor Lead Connections
Polarity across the thermostat leads is not important. When changing the motor voltage configuration, you must also change the configuration of the control transformer to match the motor voltage. Control Voltage Transformer (01129001 Rev. G). TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 18 of 28... - Page 19 99-144-009 3/4" OD VALVE, PRESSURE 99-153-006 RELIEF, 210 BAR CHECK VALVE, SIZE 99-153-011 08, NOSE-IN/SIDE-OUT VALVE SOLENOID, 99-153-015 STANDARD, w/o COIL FLOW CONTROL, 99-153-040 PRES. COMP., 2.0 GAL. TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 19 of 28...
-
Page 20: Hydraulic Schematic
The end-user is responsible for supplying the required ground-fault and short-circuit protection on the supply. Motor overload protection is provided by a thermostat built into the motor. TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 20 of 28... - Page 21 9. Clean up any debris or spilled oil. Verify that all of the labels applied to the table are in satisfactory condition. See RECORD; p. 22. TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 21 of 28...
- Page 22 A cantilevered or overhanging load at the hinged end can cause the platform to tilt and dump the load. For applications involving side or end edge loading, consult the factory. This lift table is not approved for lifting personnel. TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 22 of 28...
- Page 23 Technical Service can be contacted by calling (260) 665-7586 and asking for the Service and Parts Department or by submitting your questions through Vestil’s online parts and service portal at https://www.vestil.com/page- parts-request.php.
- Page 24 150 SUS at 100°F (ISO 32 cSt @ 40°C) or Dexron transmission fluid. TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 24 of 28...
- Page 25 5. For multi-cylinder lift tables, it will be necessary to open the bleeder valves on all cylinders simultaneously in order to bleed the valves. TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 25 of 28...
-
Page 26: Troubleshooting Guide
Flow control valve spool sticking. “Inspecting and Maintaining” section. Platform lowers too Remove and inspect valves. Clean per instructions Flow control valve spool sticking. quickly. “Inspecting and Maintaining” section. TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 26 of 28... -
Page 27: Labeling Diagram
TECHNICAL SERVICE AND REPLACEMENT PARTS DEPARTMENT online at http://www.vestilmfg.com/parts_info.htm. Alternatively, you may request replacement parts and/or service by calling (260) 665-7586 and asking the operator to connect you to the Parts Department. TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 27 of 28... -
Page 28: Limited Warranty
The warranty period for original dynamic components is 1 year. For wearing parts, the warranty period is 90 days. Both warranty periods begin on the date Vestil ships the product to the Warrantee. If the product was purchased from an authorized distributor, the periods begin when the distributor ships the product.